Semi Finished Products & Stock Shapes
By manufacturing engineering polymers from premium raw chemicals through the use of state of the art machinery, Nylacast are able to offer one of the widest range of semi finished products available in the market place, this includes an enormity of sizes for rods and plates as well as over 6,000 different combinations of tubes.
Nylacast semi finished materials are available in a wide range and combination of grades, sizes and finishes to suit particular customer needs.
Cast Plates:
- Plate casting facility produce plates from 6mm up to 100mm thick.
Sizes manufactured in the plate range:
- 2440 x 1220mm from 6mm thick to 70mm thick
- 2000 x 1220mm from 6mm thick to 100mm thick
- 2000 x 1000mm from 6mm thick to 100mm thick
- 1220 x 1220mm from 6mm thick to 100mm thick
- 1000 x 1000mm from 40mm thick to 100mm thick
- *1220 x 610mm
- *1000 x 500mm
*Minimum order quantities apply.
Small OD Rods (Rod Rounded):
- Rod diameters ranging from 10mm up to 45mm. Minimum order quantities apply as full sized plates are required to be cast. Strips are then cut from the plate and processed through a rod rounding machine. Each sized plate has a maximum yield that can be obtained and the best yield is offered as a minimum order quantity.
Rods:
- Rod casting facility produces rods from 50mm up to 500mm outside diameter.
Standard lengths manufactured within the rod range:
- 3000mm, 2440mm, 1220mm, 1000mm (500mm upon request). Availability on length will vary according to the OD.
Tubes:
- Tube casting facility produce tubes from 50mm OD up to 1000mm OD.
Standard lengths manufactured within the Tube range:
- 330mm, 500mm, 1000mm, 1220mm Availability on length will vary according to the OD/ID combination and minimum order quantities apply to certain sizes.